Installation Guide for MDR.S Cheeseplate

Packing List:

(1x) MDR.S Cheeseplate

(4x) 10mm M2 Screws

(2x) Double-side Locating Pin

Installation:

There are (4x) 10mm M2 screws that need to be installed.

1. Install the screws using a 1.5mm hex driver. Only loosely thread on the first pass. 

2. Tighten the screws down slowly, working in a star pattern. It should take a few passes. This maintains even pressure on the plate and avoids the screws becoming jammed. Do not over tighten. This can strip the screw head. For semi-permanent installation, apply Loctite Purple (222) if desired. 

Notes:

Included are (2x) double-sided locating pins. These can be used to attach quick-releases that only have female locating holes.